Uncategorized
Iridium – RFoF
The Iridium satellite network provides voice and data service to the entire planet. However, phones and network equipment will not function unless the antennas have a clear view of the sky. The Optical Zonu Iridium fibre extender system allows handsets or modems to function indoors, regardless of the distance from an outdoor antenna. These systems are perfect for direct connection to phone(s) or modem(s) installations in locations such as bunkers, large buildings, mining operations and large seagoing vessels, or in an indoor luxury structure. RF over fibre systems can function for several miles when used with single-mode cable and provide a transparent link for Iridium communication equipment. Once the signal is transported across the fibre link, it provides satellite phone connection indoors via rebroadcast through indoor antennas or connected directly to Iridium end-user equipment.
The Iridium fibre link kit contains both an outdoor antenna unit and an indoor antenna system. The outdoor unit is weatherproof with an IP-67 rating, allowing it to be installed in harsh environments directly next to an outdoor antenna. The indoor system can be either a single slot J-Chassis suitable for desktop or wall-mount use; or a 19-inch rack enclosure. The rack-mount antennae extender options can be configured to support multiple channels. Other options include remote monitoring and configuration through the J-Chassis USB port or contact closure alarm through the OZ9000 chassis.
In addition to the Iridium satellite service, Zonu provides equipment that can be used to transport other signals from antenna locations such as GPS, Satellite TV, WiFi or cell phone service. Flexible chassis systems can be custom ordered for specific applications or installations. Both single fibre or multi-fibre solutions are available. The outdoor systems can be configured to provide power to active antennas through a flexible bias T. Frequency ranges are available for response up to 6 GHz, contact a sales representative for more information.
Satcom over Fibre
The L/S Band Satcom Fiber Transport Link by Optical Zonu provides a simple, cost-effective and reliable RF connection between your satellite antenna and modem in those instances where coaxial cable is impractical or additional security is required. Each fibre link supports all frequencies from 950 MHz to 2300 MHz. The high dynamic range of the system ensures a transparent pass-through with no distortion. A low noise pre-amplifier in the downlink path ensures a margin on signal-to-noise ratio while keeping the signal in the most linear operating range of the fibre optic link.
For Tx/Rx sites, the low phase noise 10 MHz reference can be included without any impact on the L/S band performance. Other fibre optic products that combine the 10 MHz reference with the primary signal either cause degradation of the primary through mixing or poor phase noise if the reference level is too low. The Optical Zonu L/S Band Satcom Fiber Transport Link utilizes a 4 channel Coarse Wave Division Multiplexer (CWDM) to ensure that there is no mixing among all the supported signals, guaranteeing the highest signal purity. The system is modular and can be configured for Transmit/Receive or Receive Only with options for a 10 MHz Reference Signal, DC Power for the LNB and an FSK or E-Net data connection between the sites.
Major Features and Benefits
- L/S Band Fiber Optic Link Between the Satellite Modem And ODU
- IP-67 Remote Unit Connects to ODU
- Modular, Rack-Mounted Master Unit
- Transmit/Receive or Receive Only
- Separate Optional 10 MHz Path – No Mixing, Lowest Phase Noise
- Optional DC Power to LNB
- Optional Ethernet or FSK Data Connection Between Sites
PRESS RELEASE
ROJONE PTY LTD ACQUIRES MOBILE ONE AND MOBILE ONE ACOUSTIC
INGLEBURN, NSW – 3 April 2017 – Rojone Pty Ltd., announced that it has purchased Mobile One Australia Pty Ltd’s antenna and radio headset business, the purchase will better serve the needs of Rojone’s and Mobile One’s customers both locally and internationally.
The purchase of Mobile One Australia antenna manufacturing business fits into Rojone’s strategy to supply a broader range of Australian designed and manufactured antennae’s. While the purchase of the Mobile One’s Acoustic division will allow the company to better support its Defence and Aviation customers.
“Our purchase of Mobile One Australia manufacturing business will complement our overall antennae range so we can now provide an extensive antenna range to both our local and international customers,” said Livia Brady, managing director of Rojone. “The acquisition of Mobile Ones’ Acoustic division will be a new direction for the company who already supplies major components to both the Defence and Aerospace industries.” Established in 1981 and still owned & operated by one of its two original founders, Rojone is proudly one of Australia’s top RF & microwave design, manufacturing, and distribution companies. Occupying 1830 square meters’ facility at Ingleburn, NSW, employ over 50 dedicated professionals to service over 2,000 domestic & international customers. Rojone offers quality products from RF & circular connectors, coaxial cables through to military microwave components & systems from world-leading manufacturers such as Radiall & Times Microwave whom Rojone has exclusively represented in Australia for over 30 years.
The resulting acquisition will produce the following enhancements:
Mr John Brady,
CSC General Manager
7 April 2017
![]() | ![]() | ![]() |
||
| MP-101 (U-173/U) | MP-103 | MJ-101 (U-172/U) | ||
| Microphone Plugs | Microphone Plugs | Microphone Jack | ||
| 2-Pin Microphone Plug; Nylon Body | 3-Pin Microphone Plug; Nylon Body | 2-Conductor Microphone Jack; Nylon Body |
||
![]() | ![]() | ![]() |
||
| MJ-102 (U179A/U) | MJ-103 | MJ-112 | ||
| Microphone Jack | Microphone Jack | Microphone Jack | ||
| 2-Conductor Microphone Jack; Nylon Body with Button Release | 2-Conductor Microphone Jack; Nylon Body with Button Release | 2-Conductor Microphone Jack; Special Oxygen Mask Connector with Button Release Assembled in ABS Body |
||
![]() | ![]() | ![]() |
||
| MJ-113 | MJ-122 (JJ-055) | MJ-132 (JJ-055) | ||
| Microphone Jack | Microphone Jack | Microphone Jack | ||
| 3-Conductor Microphone Jack; Nylon Body | 2-Conductor Microphone Jack; Glass-Filled Nylon Body | 2-Conductor Microphone Jack; Glass-Filled Nylon Body, Used with Smaller Diameter Cable |
||
![]() | ![]() | |||
| MJS-103 | OMJ-101 | |||
| Microphone Jack Switch | Microphone Jack | |||
| Microphone Jack Switch - Functions as a Selector Switch to Choose Either a Boom Microphone or a Gas Mask Microphone by Use of The Switch Lever. | 2-Conductor Microphone Jack; Designed for Over-Molding |
FIVE CONDUCTOR PLUGS & SOCKETS
Audio Plugs | ||
![]() | ![]() | ![]() |
| AP-105 (U-182 B/U) | AP-106 (U-182-B/U ) | AP-115 (U-229 B/U) |
| Five Conductor | Six Conductor | Five Conductor |
| Mates with U-183/U and U-228/U. Use with customer molded rubber strain relief. AP-106 is the same as AP-105 except it has six conductors. | Six conductor mates with U-183/U and U-228/U. Use with molded rubber strain relief. | Mates with U-183/U and U-228/U. Coil spring strain relief. The AP-116 is the same as AP-115 except it has six conductors. |
![]() | ![]() | ![]() |
| AP-116 (U-229 B/U) | AP-125 (M55116/1) | AP-126 (M55116/2 U-229 Type) |
| Six Conductor | Five Conductor | Six Conductor |
| Six conductor mates with U-183/U and U-228/U. Coil spring strain relief. | Wire strain relief, crimp sleeve terminals. | Wire strain relief, crimp sleeve terminals. |
![]() | ![]() | ![]() |
| AP-135 | AP-136 | AP-136RA |
| Shielded Five Conductor | Shielded Six Conductor | Shielded Six Conductor |
| Wire strain relief, crimp sleeve terminals. | Same as AP-126 with provision to terminate shielded cable. Mating configuration meets MIL-C-55116specifications. | Shielded Right-angle Plug. |
![]() | ![]() | ![]() |
| AP-145 (M55116/3) | AP-146 (M55116/4 U-229 Type) | AP-155 (M55116/5) |
| Five Conductor | Six Conductor | Five Conductor |
| Wire strain relief, solder cup terminals. | Wire strain relief, solder cup terminals. | Customer Molded strain relief, crimp sleeve terminals. |
![]() | ![]() | ![]() |
| AP-156 (M55116/6) | AP-165 (M55116/7) | AP-166 (M55116/8) |
| Six Conductor | Five Conductor | Six Conductor |
| Customer Molded strain relief, crimp sleeve terminals. | Customer Molded strain relief, solder cup terminals. | Customer Molded strain relief, solder cup terminals. |
![]() | ![]() | ![]() |
| AP-175 | AP-176 | AP-186 (A3167702-2) |
| Shielded Five Conductor | Shielded Six Conductor | Six Conductor |
| Wire strain relief, solder terminals. | Wire strain relief, solder terminals. | Wire strain relief, solder terminals. |
Audio jacks | ![]() | |
| AJ-145 | AJ-146 | AJ-155 |
| Five Contacts | Six Contacts | Five Contacts |
| Panel Mount with Solder Cup Spring | Panel Mount with Solder Cup Spring | Wire Strain Relief with Crimp Sleave Spring |
| AJ-156 | AJ-165 | AJ-166 |
| Six Contacts | Five Contacts | Six Contacts |
| Wire Strain Relief with Crimp Sleave Spring | Wire Strain Relief with Solder Cup Spring | Wire Strain Relief with Solder Cup Spring |
SEVEN CONDUCTOR MILITARY WATERPROOF
![]() | ![]() | ![]() |
||
| AJ-107 | AJ-107BR | AJ-107BRS | ||
| Seven Conductor Watertight Breakaway Jack | Seven Conductor Watertight Breakaway Jug | Seven Conductor Shileded Jack | ||
| Mates with NEXUS AP-107 plug. Designed to meet severe environmental conditions. It is field replaceable. | 7 conductor, waterproof jack, wire strain relief and solder terminals, mates with AP-107. | Shielded, 7 conductor waterproof jack, wire strain relief and solder terminals, mates with AP-107BRS. Termination method is similar to the AP-136. |
||
![]() | ![]() | ![]() |
||
| AJ-107DR | AJ-107DRS | AP-107 | ||
| Seven Conductor Jack | Seven Conductor Shielded Jack | Seven Conductor Watertight Breakway Plug | ||
| Mates with NEXUS AP-107DR jack. | Mates with NEXUS AP-107DRS jack. | Mates with NEXUS AJ-107 jack. A field-replaceable connector designed to function in extremely severe environments. |
||
![]() | ![]() | ![]() |
||
| AP-107BR | AP-107BRS | AP-107DR | ||
| Seven Conductor Breakaway Plug | Seven Conductor Shielded Breakaway Plug | Seven Conductor Plug | ||
| 7 conductor, waterproof plug, wire strain relief and solder terminals, mates with AJ-107. | Shielded, 7 conductor waterproof plug, wire strain relief and solder terminals, mates with AJ-107BRS. Termination method is similar to the AP-136. | Mates with NEXUS AJ-107DR jack. |
||
![]() | ||||
| AP-107DRS | ||||
| Seven Conductor Shielded Plug | ||||
| Mates with NEXUS AJ-107DRS jack. |
FOUR CONDUCTOR PLUGS & SOCKETS
![]() | ![]() | ![]() |
||
| TP-101 (U-174/U, M9177/2-1) | TP-102 (U-93A/U, M9177/1-1) | TP-105 | ||
| Four Conductor | Four Conductor | Five Conductor | ||
| Mates with NEXUS Series TJ-120, TJ-102 and TJ-101 jacks. One piece monel contacts integrally molded with glass filled nylon plastic. | Mates with NEXUS Series TJ-120, TJ-102 and TJ-101 jacks. Nickel plated brass contacts molded into plastic body. It accomodates larger diameter cable than the TP-101 or TP-120. | 1-Piece Contacts Molded Into a Red Plastic Body. |
||
![]() | ![]() | ![]() |
||
| TP-106 | TP-108 | TP-120 | ||
| Six Conductor | Eight Conductor | Four Conductor | ||
larger image 6-Conductor Biaxial Shielded Plug. | 8-Conductor Biaxial Shielded Plug. | Mates with NEXUS Series TJ-120, TJ-102 and TJ-101 jacks. One piece nickel plated brass contacts are integrally molded into plastic body. |
||
![]() | ![]() | ![]() |
||
| TP-120-5 | TP-120-7 | TPSJ-101 | ||
| Four Conductor | Four Conductor | Four Conductor | ||
| No Plastic Housing and Strain Relief Clip; for Custom Molding Directly to Cable. | No Plastic Housing; for Custom Molding Directly to Cable. | Telephone Plug with DPDT Slide Switch and MJ-101 Jack Section. |
Miniature Seven Conductor Waterproof Plugs & Sockets
![]() | ![]() | ![]() |
||
| AJ-110OM | AJ-110OMS | AJ-117BR | ||
| Miniature Waterproof Jack, Ten Conductor | Jack, Miniature, Shielded | Miniature Waterproof Jack W/Wire Strain Relief | ||
| Over mold version, solder terminals, mates with AP-110OM. | Seven conductor, miniature waterproof jack, wire strain relief and solder terminals, .148" max. cable diameter, mates with AP-117BR, AP-117BRXL and AP-117OM. |
|||
![]() | ![]() | ![]() |
||
| AJ-117BRXL | AJ-117LR-AL | AJ-117OM | ||
| Miniature Waterproof Jack W/Strain Relief & Solder Terminals | Miniature Waterproof Jack w/Locking Ring | Miniature Waterproof Jack Over Mould Version | ||
| Seven conductor, miniature waterproof jack, wire strain relief and solder terminals,.250" max. cable diameter, mates with AP-117BRXL, AP-117BR and AP-117OM. | Seven conductor, miniature waterproof plug with locking ring, wire strain relief and solder terminals, .250" max. cable diameter, mates with AJ-117LR-AL. | Seven conductor, miniature waterproof jack, over mould version, solder terminals, mates with all versions of AP-117 except locking ring and shielded. |
||
![]() | ![]() | ![]() |
||
| AJ-117PLR | AJ-117PM | AJ-117PMDC | ||
| Miniature Rear Panel Mount Waterproof Jack W/Locking Ring | Miniature Front Panel Mount Waterproof Jack | Miniature Rear Panel Mount Waterproof Jack | ||
| Panel mount from rear of panel, 7 conductor miniature waterproof jack with locking ring, solder terminals, mates with AP-117LR-AL. | Panel mount from front of panel, 7 conductor miniature waterproof jack, solder terminals, mates with all versions of the AP-117. Nut and lockwasher are included.and shielded. | Panel Mount from rear of panel, 7 conductor miniature waterproof jack, solder terminals, mates with all versions of the AP-117. |
||
![]() | ![]() | ![]() |
||
| AP-110OM | AP-110OMS | AP-117BR | ||
| Miniature Waterproof Plug, Ten Conductor | Plug, Miniature, Shielded | Miniature Waterproof Plug w/Wire Strain Relief | ||
| Over mold version, solder terminals, mates wtih AJ-110OM. | Seven conductor, miniature waterproof plug, wire strain relief and solder terminals, .148" max. cable diameter, mates with AJ-117BR, AJ-117BRXL and AJ-117OM. |
|||
![]() | ![]() | ![]() |
||
| AP-117BRXL | AP-117LR-AL | AP-117OM | ||
| Miniature Waterproof Plug W/Wire Strain Relief & Solder Terminals | Miniature Waterproof Plug W/Locking Ring | Miniature Waterproof Plug Over Mould Version | ||
| Seven conductor, miniature waterproof plug, wire strain relief and solder terminals, .250" max. cable diameter, mates with AJ-117BRXL, AJ-117BR and AJ-117OM. | Seven conductor, miniature waterproof plug with locking ring, wire strain relief and solder terminals,.250" max. cable diameter, mates with AJ-117LR-AL | Seven conductor, miniature waterproof plug, over mould version, solder terminals, mates with all versions of the AP-117 except locking ring |
||
![]() | ||||
| AP-117PLR | ||||
| Miniature Rear Panel Mount Waterproof Plug w/Locking Ring mates with all AJ-117 Series | ||||
| Panel mount from rear of panel, 7 conductor miniature waterproof plug with locking ring, solder terminals, mates with AJ-117LR-AL. |
Military Plugs and Jacks, Biaxial Shielded 6,8, & 10 Conductor
![]() | ![]() | ![]() |
||
| TP-106 | TJ-106 | TJ-106 PM | ||
| TELEPHONE PLUG BIAXIAL SHIELDED SIX CONDUCTOR | TELEPHONE JACK BIAXIAL SHIELDED SIX CONDUCTOR | TELEPHONE JACK BIAXIAL SHIELDED SIX CONDUCTOR PANEL MOUNT | ||
![]() | ![]() | |||
| TJS-106 | TJSS-106 | |||
| TELEPHONE JACK SWITCH, BIAXIAL SHIELDED | TELEPHONE JACK TWO SWITCHES, BIAXIAL SHIELDED | |||
| Mates with TP-106 plug. TJS-108 Telephone jack Switch, Biaxial shielded, eight conductor. | Mates with NEXUS TP-106 plug. TJSS-108 Telephone Jack, two switches, biaxial shielded, eight conductor. |



































































