Products & Services
-
Latest News
Site Wide Search
Select Your Language
4.3-10 Connectors
The 4.3-10 Connector is a small, lightweight solution for indoor and outdoor telecommunications applications where high performance and low intermodulation are essential.
Small and Lightweight
These lightweight 4.3-10 Connectors are 30% smaller and 60% lighter than the comparable 7/16 square flange jack receptacle. The more compact design allows for a higher connector density on equipment and can support up to 500 Watt at 2 GHz.
Performance
The new interface design features low VSWR to cut-off frequency and a very low (< -166 dBc) passive intermodulation in both static and dynamic conditions.
Easy Installation – Screw, Hand Screw and Push-Pull
A key feature of the 4.3-10 Connector system is its reduction of required coupling torque, achieved by separating the electrical and mechanical reference planes. 4.3-10 Connectors are available with screw, hand-screw and push-pull coupling mechanisms and all utilising a common jack to simplify installation and extending the range of suitable applications.
Outdoor Applications
The 4.3-10 Connector is also suitable for outdoor environments where reliability is required. Rated to IP68 when mated, and leveraging quality manufacture techniques optimizes the connector for harsh environmental conditions.
Rojones 4.3-10 Catalogue is being updated contact us directley for more information
Rotary Joints – SPINNER Group (Germany)
Rotary joints are needed wherever high-frequency signals have to be transmitted between a fixed platform and a second platform in continuous rotation. Such applications include traditional radar technology for air traffic control or anti-missile defence, medical engineering, V-Sat and SatCom technology as well as TV camera systems or cable drums that allow sensitive cables to be wound up without twisting them, thus increasing their reliability.
In principle this can be achieved by three different technologies which mainly depend on the frequency of the transmitted signals:
-
Contacting transmission by slip rings
Depending on the unit size such contacting systems can transmit signals from
DC up to 120 MHz.
Coaxial contacting rotary joints
These SPINNER products allow signal transmission in the frequency range from
DC up to 50 GHz.
Contact-free rotary joints
Such extremely long-lived rotary joints are available as coaxial and waveguide
units. The maximum signal transmission bandwidth is about 20% of the upper
frequency to be transmitted.
The Spinner Company further offers:
-
Rotary joints for optical signal transmission
These can transmit up to 21 channels, as well as combinations of the individual types listed above in one rotary joint.
The special benefits of SPINNER rotary joints include their compact design, excellent VSWR and low attenuation loss, low variation of transmission properties during rotation, and high crosstalk attenuation between the individual channels over the whole frequency range.
With over 60 years of experience in RF technology SPINNER is in a position to develop and deliver any kind of rotary joint combination you may need.
Radiall – Fiber Optic Harnesses and Complex Optical Systems
With over 40 years of Fiber Optic experience, Radiall is a global leader in the design and development of high quality harness and complex optical systems for demanding applications.
Radiall’s experienced R&D team is an essential part in the design and development of optical solutions for Military and Aerospace applications. With 3 design centers available around the world, Radiall is able to quickly address customer needs and provide excellent customer support at a local level.
Radiall offers a full range of optical interface technologies including, LuxCis® ARINC 801, Expanded Beam (EB) and high density MT ferrules. Our highly skilled manufacturing team can terminate,
assemble and test optical interfaces for commercial and aerospace
grade cables for PC, UPC and APC applications.
Radiall’s design and manufacturing expertise, and Fiber Optic interconnect product offering provides custom harness solutions to meet customers needs. Additional capabilities include hybrid (mixed optical & electrical) and hermetic solutions suitable for the following environments:
- Commercial and Military Aerospace
- Ground tactics
- Navy
The dedicated design team at Radiall is available to provide support for optical links requiring excellent performance and ease of installation, as well as develop application specific accessories or interconnect solutions when required. Committed to meeting delivery demands, Radiall has 4 conveniently located AS9100 certified manufacturing locations. This allows engineers to interface directly with customer drawings and design systems for direct manufacturing and risk mitigation.
Radiall is available to support a wide range of requirements, from simple contact and connector solutions to the most complex Fiber Optic based harnesses or sub systems for harsh environments.
For additional information, contact our Sales Team
LMR® Bundled Cable
LMR® Bundled Cable
Times Microwave Systems specialises in the design & manufacture of high-performance, flexible, low-loss standard coaxial M17 cable for RF transmission from HF through to Microwave frequencies, DC to 46GHz.
As the exclusive Australian Agent, Rojone is pleased to announce the introduction of LMR® Bundled Cable. This is a spiral configuration of multiple LMR® 400 or smaller LMR® cables, each with a standard polyethylene outer jacket. This innovative design serves as the perfect feeder cable for applications that require multiple runs, such as on towers or rooftop sites. A unique, patented grounding fixture grounds the outer shields of each cable and a rugged end cap seals the bundle to prevent moisture ingress at the break-out point.
LMR® Bundled Cable can be supplied as a complete assembly with breakouts and connectors on both ends, and as a single-ended assembly (base can be trimmed and terminated after installation on tower), or as a raw cable and accessories along with easy-to-use tools. Pictorial instructions and installation videos are available to assist with installing the accessories.
Features and Benefits:
- Less Cable Runs
- Fewer Ground Kits and Cable Clamps to Install
- Reduced Labour and Material Costs
- Rip cord for easy removal of outer jacket
- Inner cables are labelled with an identifier every six inches
Standard Cables Include:
- LMR-BC240-4
- LMR-BC300-12
- LMR-BC240-9
- LMR-BC400-7
- LMR-BC240-9-LW-75
- LMR-BC400-9
- LMR-BC-240-12
- LMR-BC400-9-DB
EC-BC Series End Cap Kits
Times Microwave Systems offers weather-seal break-out caps for a number of LMR® bundled cables. These kits consist of a rugged ABS plastic split shell with stainless steel screws, a silicone rubber split cushion and a silicone rubber gasket. The split cushion is formed over the inner cables and the shell is then positioned over the transition so that the end of the outer jacket of the cable is roughly in the middle of the shell.
Semi Rigid Coax Cables
Military Standard Semi-Rigid Coax Cables
| Cable Code | Nominal Imped. | Capac. pF/ft | Capac. pF/m | Dielec. Material | Conduct. Size (in.) & Type | Shield Type | Outer Dim. (in.) | Outer Dim. (mm.) | Weight (kg/100m) | Min. Bend Radius (in.) | Min. Bend Radius (mm.) | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M17/129-RG401 | 50 | 29.6 | 97.1 | PTFE | 0.0641 SC | BC TUBE | 0.25 | 6.35 | 15.6 | 0.125 | 3.175 | SWEPT ATTN & SRL FROM 400-18,000MHZ |
| M17/129-00001 | 50 | 29.6 | 97.1 | PTFE | 0.0641 SC | TC TUBE | 0.25 | 6.35 | 15.6 | 0.125 | 3.175 | TIN PLATED M17/129-RG401 |
| M17/130-RG402 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/130-00001 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | TC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | TIN PLATED M17/130-RG402 |
| M17-130-00002 | 50 | 29.9 | 98.1 | PTFE | 0.362 NCCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/130-00003 | 50 | 29.9 | 98.1 | PTFE | 0.0362 NCCCS | TC TUBE | 0.141 | 3.58 | 5.22 | 0.075 | 1.905 | TIN PLATED M17/130-00002 |
| M17/130-00004 | 50 | 29.9 | 98.1 | PTFE | 0.362 SCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/130-00005 | 50 | 29.9 | 98.1 | PTFE | 0.0362 SCCS | TC TUBE | 0.141 | 3.58 | 5.22 | 0.075 | 1.905 | TIN PLATED M17/130-00004 |
| M17/130-00006 | 50 | 29.9 | 98.1 | PTFE | 0.362 NCCCS | BC TUBE | 0.141 | 3.58 | 5.12 | 0.075 | 1.905 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/133-RG405 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | BC TUBE | 0.0865 | 2.2 | 2.28 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17-133-00001 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | TC TUBE | 0.0865 | 2.197 | 2.35 | 0.05 | 1.27 | TIN PLATED M17/130-RG405 |
| M17/133-00006 | 50 | 32 | 105 | PTFE | 0.0201 SCCS | BC TUBE | 0.0865 | 2.197 | 2.28 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/133-00007 | 50 | 32 | 105 | PTEF | 0.0201 SCCS | TC TUBE | 0.0865 | 2.197 | 2.35 | 0.05 | 1.27 | TIN PLATED M17/133-00006 |
| M17/151-00001 | 50 | 32 | 105 | PTFE | 0.0113 SCCS | BC TUBE | 0.047 | 1.194 | 0.6 | 0.05 | 1.27 | SWEPT ATTN & SRL FROM 500-20,000MHZ |
| M17/151-00002 | 50 | 32 | 105 | PTFE | 0.0113 SCCS | TC TUBE | 0.047 | 1.194 | 0.6 | 0.05 | 1.27 | TIN PLATED M17/151-00001 |
| Standard Cable | 0.087″ | 0.141″ |
| CNC Fomers | 6.4 mm | 8 mm |
| Radiuses | 10 mm | 10 mm / 12.5 mm |
Custom sizes available
Abbreviations
| SC | Silver-Covered Copper |
| SCCS | Silver-Covered Copper-Clad Steel |
| NCCCS | Nickel-Covered Copper-Clad Steel |
| BC TUBE | Bare Copper Tube |
| TC TUBE | Tinned Copper Tube |
| PTFE | Polytetrafluoroethylene |
Lightning Protection – Data
Data line lightning & surge protectors are used to protect sensitive equipment from lightning strikes and surges on the Ethernet data lines. With the introduction of faster standards like 100 and 1000 Base-T Ethernet, faster data speeds require the equipment manufacturers to use sensitive high speed components that require protection.
Designed for Cat8, Cat5e and Cat6 applications, we have a range of data line protections available in different power leaves. From low power modules typically used for hubs or client installations, to high power, 3 stage protection use for maximum surge protection.
One of the latest editions to this range is our 19” rack mounted 4, 12 and 24 port Cat5 or CAT6 10/100/1000 Base T Surge protectors with RJ45 connections affordably priced.
In addition to data line protection, we can also offer protection for your telephone, DSL, T1, RS422/485, RS232, 4-20mA Current loop, AC/DC and video applications.
Data Cable – Cat 5, Cat 6, Cat 7
The fundamental importance of the Data Centres and the need to provide for daily increasing applications, transmission speeds and data storage, businesses are investing in the amount of equipment their Data Centres must support. Consequently, IT managers must design scalable Data Centres to support their future growth and potentially new technologies, while ensuring the best performance.
Rojone supplies high quality Data cables consist of Cat.5e to Cat.7A multi-cable, multi-pair and multi-core structures solid and matched work area cables.
All cables are fully compatible with the standard connecting hardware (i.e. RJ-45).
All products are available with FR-LSZH, PVC, PU and PE jackets combined with different optional shielding structures such as S/FTP, SF/UTP, F/UTP, U/FTP.
The cables are designed with optimised lay lengths, size, transmission performance and structures to enable peak high density data-centre cabling.
High-density cabling creates less congestion in pathways which means better cooling conditions in particular for PoE and PoE+ applications, lower installation time, minimises down time, accelerates recovery time, minimises site access by non-essential personnel, and allows place-and plug modular installation for Gigabit and up to 10 Gigabit applications.
Category 5e, 100 Ohm
100 MHz Data Transmission Cables
The basic solution is a complete line of high-performance 100 Ohm cables, conforming to Category 5e in accordance with TIA/EIA-568-C, ISO/IEC 11801, IEC 61156-5, IEC 61156-6 and CENELEC prEN 50288, supporting CLASS D (new) Links.
The product range includes Horizontal, Working area (Patch) and Backbone Cables, available in a wide range of constructions, including U/UTP, F/UTP, SF/UTP and S/FTP.
All cables are available with PVC, PU (Polyurethane), PE (Polyethylene) and FR-LSZH (Flame Retardant Low Smoke Zero Halogen) jackets, in single or “Siamese twin” (FIG-8), multi-cable, or multi-core constructions.
Category 5e Data Transmission Cables
| Part Number | Product Description | Computer & LAN Applications | Outer Jacket Material | Outer Diameter (mm nom.) |
|---|---|---|---|---|
| 4T00080101 | Cat. 5e 4x2x24/1 AWG U/F/UTP + 17 AWG CCS Fig-8 Double Jacket Outdoor UL1581-VW1/CMX Jacket Outdoor UL1581-VW1/CMX | Outdoor installations | UV resistant FR-PVC | 7.9 |
| 8393204xxx | Cat. 5e 4x2x24/1 AWG F/UTP Outdoor PVC/PVC UL (1581 VW 1) (UL) LISTED E211498 | Outdoor installations | UV resistant FR-PVC | 7.9 |
| 7272604xxx | Cat. 5e 4x2x26/7 AWG Work Area U/UTP PVC | Indoor use, fixed or portable installations | FR-PVC | 4.9 |
| 8272626xxx | Cat. 5e 4x2x26/7 AWG F/UTP Work Area PVC | Work area cabling | FR-PVC | 5.70 |
| 9292604xxx | Cat. 5 4x2x26/7 AWG SF/UTP Work Area PVC | Work area cabling | FR-PVC | 5.3 |
| 7562004xxx | Cat. 5e 4x2x24/1 AWG U/UTP PVC | Indoor use, fixed installations | FR-PVC | 5.0 |
| 7568204xxx | Cat. 5e 2x(4x2x24/1 AWG) FIG-8 U/UTP PVC P Fig-8 | Indoor use, fixed installations | FR-PVC | 5.1 |
| 8371204xxx | Cat. 5e 4x2x24/1 AWG F/UTP PVC | Indoor use, fixed installations | FR-PVC | 6.1 |
| 8391304xxx | Cat. 5e 4x2x24/1 AWG F/UTP Outdoor Low Temperatures PVC | Indoor/Outdoor use, fixed installations | UV resistant FR-PVC | 7.2 |
| 8371804xxx | Cat. 5e 2x(4x2x24/1 AWG) FIG-8 F/UTP PVC | Trunking | FR-PVC | 6.1 |
| 8371406xxx | Cat. 5e 6x(4x2x24 AWG F/UTP) Multi-Cable PVC | Indoor use, fixed installations | FR-PVC | 20 |
| 8371412xxx | Cat. 5e 12x(4x2x24 AWG F/UTP) Multi-Cable PVC | Indoor use, fixed installations | FR-PVC | 27.6 |
| 8371425xxx | Cat. 5 25x(4x2x24 AWG F/UTP) Multi-Cable PVC | Trunk Cable for Local Area Networks | FR-PVC | 35.5 |
Category 6, 100 Ohm
250 MHz Data Transmission Tables
The GIGA-STAR Solution is a complete line of data-transmission cables horizontal and work area types, designed for Cat. 6 and Cat. 5e for use in CLASS D and CLASS E cabling systems.
GIGA-STAR cables are tested up to 300 MHz, and are fully compatible with ISO/IEC 11801, IEC 61156-5, IEC 61156-6, and TIA/EIA 568C.
The GIGA-STAR Solution is consists of the following three groups:
- U/UTP cables, where high NEXT and FEXT loss values are achieved by mechanical pair separation
- U/FTP cables, where high NEXT and FEXT loss values are achieved by individual pair shielding
- S/FTP cables, where an additional overall braid shield provides outstanding EMC performance
Our customers have the option of selecting a true Category 6 cable that meets all the transmission parameters required to support the advanced applications with 3 different levels of EMC performance:
- U/UTP cables: 50 dB coupling attenuation
- U/FTP cables: 75 dB coupling attenuation
- S/FTP cables: 85 dB coupling attenuation
All GIGA-STAR cables feature high values of PS-ACR and PS-ELFEXT, and a stable 100 Ohm characteristic impedance ensuring very low Return-Loss, making The GIGA-STAR Solution ideal for GIGABIT-Ethernet applications. All cables are available with a PVC or Flame Retardant Low-Smoke Zero-Halogen (FR-LSZH \ HFFR) jacket and in a single or “Siamese twin” (FIG-8) construction.
Category 6 Data Transmission Cables
| Part Number | Product Description | Computer & LAN Applications | Outer Jacket Material | Outer Diameter (mm nom.) |
|---|---|---|---|---|
| 720KZ04xxx | Cat. 6 4x2x24/7 AWG U/UTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.5 |
| 9828022xxx | Cat. 6 4x2x26/7 AWG U/FTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.3 |
| 9828026xxx | Cat. 6 4x2x26/7 AWG S/FTP Work Area PVC | High bandwidth digital applications with low BER | FR-PVC | 6.4 |
| 750AZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP PVC | Indoor use, fixed installations | FR-PVC | 6.7 |
| 750BZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP FRLSZH | Data-Centers/SANs | FR-LSZH | 6.6 |
| 750BZR4101 | Cat. 6 4x2x23/1 AWG U/UTP SWA Outdoor Direct Burial LSZH | Trunk Cable for Local Area Networks | UV resistant PO compound | 12.7 |
| 750UZ04xxx | Cat. 6 4x2x23/1 AWG U/UTP Indoor/Outdoor FR-LSZH/FR-LSZH | Low temperature Indoor/Outdoor applications | FR-LSZH | 8.3 |
| 8300204xxx | Cat. 6 4x2x23/1 AWG U/FTP FRLSZH | Indoor use, fixed installations | FR-LSZH | 7.3 |
| 8300804xxx | Cat. 6 2x(4x2x23/1 AWG) FIG-8 U/FTP FR-LSZH | Trunk Cable for Local Area Networks | FR-LSZH | 7.6 |
| 8300904101 | Cat. 6 4x2x23/1 AWG U/FTP Outdoor LSZH | Indoor/Outdoor use, fixed installations | FR-LSZH | 9.6 |
| 8300C04101 | Cat. 6 4x2x23/1 AWG U/FTP CSA FR-LSZH/PE | Outdoor and direct burial installations | UV Resistant FR-PO | 13.2 |
| 830D104xxx | Cat. 6 4x2x23/1 AWG U/FTP Drop PVC | Trunk Cable for Local Area Networks | UV resistant FR-PVC | 7.4 |