GPS (L1/L2) Repeater Kit

The most recent edition to our repeater kit range is our NEW L1/L2 Dual Band series.  Unlike the requirements of commercial GPS users, both the antennas and repeater module have been created for high performance Military and commercial applications.

The L1/L2 Repeater Kit basically only contains the antennas and repeater module and a suitable power supply.  In addition, a quantity of RF Coaxial interconnect cables will be required  for installation.

Brochure for Portable L1/L2 Repeater System

Brochure for Fixed L1/L2 Repeater System

SPECIFICATION

Part Number - GPS-L1L2REPEAT-1

The Dual band GPS-REPEAT L1/L2 kit consists of the following items;

1. Active - L1/L2 Antenna.  Supplied with a pole mount installation option, bottom exit N Female (Jack) connector (Part No. GPSA5F2DR513GA).
2. Passive - L1/L2 Antenna.  Supplied with bottom exit N Female (Jack) connectors (Part No. GPSP2DR813G).
3. L1/L2 Repeater Block (Part No. AMA-161).  Provides filtering and amplification at both 1530-1580 MHz, 1220-1230 MHz.  It is also used to supply power to the active antenna.

Note: RF coaxial interconnecting cables are NOT supplied as part of this kit.  Products of this nature are specialised; as such, as recommend custom cable to suit your specific application.  Please consult with your Rojone Technical Sales representative.

The standard kit weighs 2.8 kg.

Accessories -

• 2 way splitter (Part No. AMA-1255-3-1w)
• Passive antenna (Part No. GPSP2SR813G)
• Low loss cable assemblies custom manufactured to order for interconnections.

Warning: This system may cause interference.  Variable or inline attentuators should be used to back off the signal to an acceptable level.

GPS12RXA13NS GPS Antenna

The GPS12RXA13NS GPS Antenna features;

• low noise (0.7 dB)
• high rejection (80-100 dB) for all mobile-phone bands and VHF/UHF two way radios
• high accuracy (to the centim

GPS Power Dividers

GPS12RXA13NS GPS Antenna

The GPS12RXA13NS GPS Antenna features;

• low noise (0.7 dB)
• high rejection (80-100 dB) for all mobile-phone bands and VHF/UHF two way radios
• high accuracy (to the centimetre level)
• more than 180 degrees elevation

• 50 dB for high-performance survey GPS devices with low EMI environemnt use
• 33 dB for general purpose use
• 20 dB for base station and TV station use
  

GPS Genius Smart Antennas - Introduction 795KB PDF

Genius 1 246KB PDF 12 channel Receiver complete with internal antenna Connector RJ45 standard Cable 3 Mtrs (9.84') Length Interface RS232 or TTL, Protocol SiRF or NMEA 4800 Baud Input power range 8 to 30 Volts Size 75 x 75 x 18 mm
Mini - Genius 1 USB 252kb pdf 12 Channel receiver complete with internal antenna USB Interface & connector NMEA 4800 standard Protocol Plug "n" Play solution for notebooks, can be used with most commercially available mapping programs Size 75 x 75 x 18 mm
Genius 1 MaxiNav 504KB PDF 12 Channel Receiver complete with internal antenna Hash enviromental housing, sealed for water, salt, humidity, chemicals, etc 8 Pin hermetic connector Protocol SiRF or NMEA 4800 Baud Input power range 8 to 30 volts Size 148 x 132 x 22 mm
Micro Genius 3 271KB PDF 12 Channel Receiver Complete with attached antenna Protocol SiRF or NMEA 4800 Input power 5 volts Interface RS232 or TTL Connector 12 pin samtec Size 66 x 66 x 7.2 mm inc Ant
uPatch02 432KB PDF GPS OEM Genius 3 = FASTRAX Smart Antenna
wayLOGGERTM Low Cost - No operating costs Easy To Use Application Software Supplied
GPS ANTENNAS
GPS MicroNav 138KB PDF Low Cost - Ceramic Antenna Suitable for a variety of GPS Receivers
GPS MiniNav 635KB PDF Low Cost - High Performance Suitable for a variety of GPS Receivers
GPS MaxiNav 863KB PDF High Performance Harsh Environment Sealed Radome
GPS2000 superseded by MaxiNav 440KB PDF Active or Passive design High Dielectric PCB Antennas Appearance Low Profile Round Housing High Impact UV Stable Radome Gloss White Finish
GPS/DGPS Non-Magnetic Survey Antenna   2,472KB PDF Wide Frequency Band 1530-1580Mhz Active Antenna - LNA 50dB Gain Typical NON-Magnetic construction Low profile, Modular Design Easy to install
Satellite Phone Auxiliary Antenna   37KB PDF Part Number: IGPSP99TP3 Iridium frequency range Magnetically mountable Standard with 3 mtr cable tail and TNC plug
GPS Amplifier  488KB PDF Part Number: AMA-061B  Broadband GPS Amplifier Part Number: AMA-061F High rejection GPS Filtered
GPS Repeater Kit  101KB PDF Easy, Low Cost Intallation Suitable for a variety of GPS Receivers
Bandpass Filter  34KB PDF Part Number: AMA-4330-1575-10N Narrow band high rejection filter
Cavity Bandpass Filter  62KB PDF 5 Section High Performance Filter Preselected for GPS and DGPS Signals

To GPS Repeater
Connector Pinout for Genius1
Rojone-GPS-FAQ (Frequently Asked Questions)
Windows Me, 98SE, 2000, Mac driversZip(82kb)
Mac OSX / Jaguar USB drivers (Sit File 463K)
Windows XP Drivers (Zip File - 14K)
Windows XP Readme (Zip File - 516K)
GPS Genius USB driver for Mac 10.3.x (Sit 121KB)

Products Page