Rojone Products - Connector Pinout

CONNECTOR PINOUT
for Genius 1 with Switchmode Regulator

Tajimi 8 Pin Connector Standard

PIN	NAME	DESCRIPTION	NOTES	WIRE COLOUR
1	TIMEMARK	Time Mark Output, 1 PPS	TTL	Orange
2	TXA	Main Serial Data Output	RS232 Levels	White
3	RXA	Main Serial Data Input	RS232 Levels	Brown
4	RXB	DGPS Serial Data Input	RS232 Levels	Blue
5	GND	Receiver Ground		Black
6	VCC	8 to 30 VDC Power Supply Input	8 to 30 Volts +/-0.25V	Red
7	RESET	External Reset, Active LOW	TTL	Green
8	BAT	+3 VDC Backup Battery	+2 VDC to Vcc +0.5V	Yellow
	AUX	Aux Data Output

Rojone typically only supplies 8 Pin plug in either a modular or circular connector;
therefore the 9th Pin is not connected.

DB9 Pin PC Connector (with Separate Power Connector)

PIN	NAME	DESCRIPTION	NOTES	WIRE COLOUR
1	N/C
2	TXA	Main Serial Data Output	RS232 Levels	White
3	RXA	Main Serial Data Input	RS232 Levels	Brown
4	RXB	DGPS Serial Data Input	RS232 Levels	Blue
5	GND	Receiver Ground		Black
6	AUX	Aux Data Output	TTL	White
7	N/C
8	N/C
9	TIMEMARK	Time Mark Output, 1 PPS	TTL	Orange

This unit is compatable with the standard 9 pin PC serial port.
Power Supply is via a Tajimi R05 series connector (Pin A positive, Pin B: negative),
or a 12 Volt Car Lighter Adaptor.

DB9 Pin FEMALE Connector Standard (non PC)

PIN	NAME	DESCRIPTION	NOTES	WIRE COLOUR
1	TIMEMARK	Time Mark Output, 1 PPS	TTL	Orange
2	TXA	Main Serial Data Output	RS232 Levels	White
3	RXA	Main Serial Data Input	RS232 Levels	Brown
4	RXB	DGPS Serial Data Input	RS232 Levels	Blue
5	RESET	External Reset, Active LOW	TTL	Green
6	BAT	+3 VDC Backup Battery	+2 VDC to Vcc +0.5V	Yellow
7	AUX	Aux Data Output		White
8	VCC	Power Supply Input	8 to 30 Volts +/-0.5V	Red
9	GND	Ground		Black

DB9 Pin MALE Connector Standard (non PC)

PIN	NAME	DESCRIPTION	NOTES	WIRE COLOUR
1	AUX	Aux Data Output
2	RXA	Main Serial Data Input	RS232 Levels	Brown
3	TXA	Main Serial Data Output	RS232 Levels	White
4	TIMEMARK	Time Mark Output, 1 PPS	TTL	Orange
5	GND	DGPS Serial Data Input	RS232 Levels	Blue
6	BAT	+3 VDC Backup Battery	+2 VDC to Vcc +0.5V	Yellow
7	GND			Black
8	VCC	Power Supply Input		Red
9	RESET	External Reset, Active LOW	TTL	Green

Custom pin-outs and connectors are available on request.
Should you need any further assistance, please contact Rojone.

Drawings for Genius 1 options.

Back to GPS Receiver Index